HOME > Product Information > No.101TABER TYPE ABRASION TESTER
No.101 TABER TYPE ABRASION TESTER
TABER TYPE ABRASION TESTER
| JIS-A1453、（K5400）、K5600-5-8/9、K5665、K6264-2、K6404-22、K6902、K7204、L1018、L1085、L1096、 ASTM-D1044、D1175、TAPPI-T476、JAS、JASO、 ISO-4649、5470-1、7784-1/2、9352 |
| This tester is used to evaluate the abrading endurance of flat surface materials when they are abraded with an abrading wheel. The operator is to place the abrading wheel to the rotating test specimen at a prescript load and abrade the test specimen. After the test is finished, the operator is to measure the abraded mass, volume, thickness, and the optical difference of the test specimen. This tester is widely used in testing plastic, rubber, decorative sheet, leather, paper, and paint surface. |
Specification
MAIN BODY
| Turn Table | φ150mm |
|---|---|
| Table Rotation speed | 60±2rpm and 70±2rpm (2 Stage Change-Over ) |
| Test Load | 2.45N (250gf), 4.9N (500gf), and 9.8N (1,000gf) |
| Counter | 6 Digits Preset Counter |
| Suction Nozzle | φ8mm |
| Accessories | Abrasion Wheel・・1set (2sets for ST2), Gauge ・・・2pcs, Suction Device・・1set |
| Power source | 100V 1-Phase 18A 50/60Hz 100V 1-Phase 23A 50/60Hz (ST2) *two outlet needed |
| Dimensions/Weight(Approx.) | W320×D330×H360mm・22kg W640×D330×H360mm・50kg (ST2) |
REFACER (Diamond Dresser)
| Tool | Diamond |
|---|---|
| Rotation speed | 1,400rpm (50Hz) or 1,700rpm （60Hz) |
| Power source | AC220V 1-phase 5A 50/60Hz |
| Dimensions/Weight(Approx.) | W210ｘD330ｘH380mm・10kg |
