HOME > Product Information > No.140-SAS-2002SEMI AUTOMATIC CAPILLARY RHEOMETER FOR LIGHT LOAD
No.140-SAS-2002
SEMI AUTOMATIC CAPILLARY RHEOMETER FOR LIGHT LOAD
SEMI AUTOMATIC CAPILLARY RHEOMETER FOR LIGHT LOAD
 |
| JIS-K7199、ASTM-D3835、ISO-11443 | ||
This tester evaluates the flow feature of molten plastic during the forming process. The molten test specimen inside the cylinder that is set at a specific temperature will be extruded from the capillary die. During the extrusion, the shear stress and the shear viscosity is detected to measure the melt viscosity of the test specimen. The tester is equipped with an automatic cleaning system which enables the operator to continuously run 1 test cycle (option of 3 test cycles). The tester can be chosen between the light load type and the heavy load type according to the test specimen’s maximum load. related products
|
Specification
| Hangings | 1 or 3 Hangings (2 kinds) |
|---|---|
| Maximum Load | Max.10kN |
| Load Measuring | Load Cell: Max. 10kN (Scale 0.1N) |
| Ram Speed | 0.5〜500mm/min |
| Die | φ0.5〜φ2mm, L/D (To be Specified) |
| Piston | φ9.510±0.005mm, L6.35±0.10mm |
| Cylinder | φ9.550±0.025mm, L160mm |
| Temperature Range | Max.400℃ |
| Software | Suitable for WindowsXP |
| Accessories | Cleaning Rod (Die & Cylinder), Solvent Cleaning Device, Specimen Cup, Cup Holder, Infundibulum, Die Gauge, Spirit Level, Dust Box, Gauze, Air Gun, Ratchet Wrench |
| Option | Hastelloy Cylinder, Specimen Purging Device, Specimen Drying Device, Air Compressor, Temperature Calibration Device, Exhaust Fan, Smoke-Detection Sensor |
| Power Source | 220V 1-Phase 10A 50/60Hz |
| Air Source | 0.5MPa or More |
| Dimensions/Weight (Approx.) | W600×D630×H1,070mm・180kg |
